User Manual

UTD1000L
User Manual
48
To measure AC Current within 1mA-40mA do the
following
1 Press I button to set measurement type to AC
Current
2. Press F3 to select mA range, the
measurement unit will change into mA
accordingly.
2 Plug mA current module UT-M10 properly
into input terminals COM and then turn
the switch on the module to 40mA
range Insert Black and Red test leads
correspondingly into Black and Red terminals
on the module
4. Connect test leads to tested points, then take the
AC current reading
Figure 5-18 Measuring AC Current Lower than
40mA
,
:
.
,
. ( )
,
.
.
.
V/Ω