User Manual

UTD1000L
User Manual
47
Measuring AC Current with UTD1000DL
To measure AC current equal to or lower than
1mA do the following
1 Press I button to set measurement type to AC
Current the measurement unit is You
can use F3 button to select between mA
and A ranges the default is
2 Plug mA current module (UT-M10 properly
into input terminals COM and then turn
the switch on the module to uA range
3 Insert Black and Red test leads correspondingly
into Black and Red terminals on the module.
4. Connect test leads to tested points, then take the
AC current reading.
Figure 5-17 Measuring AC Current Equal to or
Lower than 1mA
, :
.
, .
,
, .
. )
,
.
.
μA
μA
μA
V/Ω