User Manual

To measure DC current within 40mA-400mA do
the following
1 Press I button to set measurement type to
DC Current
2. Press F3 to select mA range, and the
measurement unit will display mA accordingly.
3. Plug mA current module (UT-M10 into input
terminalsCOM and then turn the switch
on the module to 400mA range
4 Insert Black and Red test leads correspondingly
into Black and Red terminals on the module.
5 Then connect test leads to tested points
than take the DC current reading
Figure 5-15 Measuring DC Current within 40mA-
400mA
,
:
.
.
)
,
.
.
. ,
.
V/Ω
UTD1000L
User Manual
45