User Manual

UTD1000L
User Manual
44
To measure DC current within 1mA 40mA do the
following
1. Press I button to set measurement type to DC
Current
2. Press F3 to select mA range the
measurement unit will change into mA
accordingly.
3. Plug mA current module (UT-M10 into input
terminalsCOM and then turn the switch
on the module to 40mA range
4 Insert black and red test leads correspondingly
into Black and Red terminals on the module
5 Then connect test leads to tested points
than take the DC current reading
Figure 5-14 Measuring DC Current Lower than
40mA
- ,
:
.
,
)
,
.
.
.
. ,
.
V/Ω