User Manual

UTD1000L
User Manual
43
Measuring DC Current with UTD1000DL
,
, ,
,
,
)
,
.
. ,
.
To measure DC current equal to or lower than 1mA
do the following:
1. Press I button to set measurement type to DC
Current the measurement unit is you can
use F3 to toggle between mA and A
ranges the default is mA
2. Plug mA current module (UT-M10 into input
terminals COM and then turn the switch
on the module to uA range
3. Insert black and red test leads correspondingly
into Black and Red terminals on the module
4 Then connect test leads to tested points
than take the DC current reading
Figure 5-13 Measuring DC Current Equal to or
Lower than 1mA
μA
μA
V/Ω