User Manual

UTD1000L
User Manual
42
Figure 5-11 Measuring AC Current Lower than
400mA
To measure AC current greater than 400mA do
the following
1 Press I button to set measurement type to AC
Current
2 Press F3 button to select A range, and the
measurement unit will change into A
accordingly
3 Plug 10ACurrent divider module(UT-M07 into
Input terminalsCOM and mA then
insert black and red test leads properly into the
module
4 Connect test leads to tested points then
take the AC current reading
If test leads are connected to COM
and without use of 10A Current divider
module UT-M07 when measuring current
greater than 400mA, the fuse in th
e product will
be burnt out Please have the fuse replaced by
qualified personnel if the incident happens
Figure 5-12 Measuring AC Current Greater than
400mA
,
:
.
,
.
.
. )
/ ,
. ,
.
:
( )
.
μA
μA /mA
Warning