User Manual

UTD1000L
User Manual
39
Measuring AC Voltage Measuring DC Current with UTD1000CL
Current
, :
.
.
.
).
.
,
:
, ,
, ,
/ )
. ,
.
To measure AC voltage do the following
1 Press V button to set measurement type to DC
Voltage.
2 Press F1 button to select AC Voltage option.
3 Plug test lead connectors into multimeter
input terminals (Black to COM and Red to
4 Connect test leads respectively to tested
points, then take AC voltage reading.
Figure 5-6 Measuring AC Voltage
To measure DC current lower than 4mA do the
following
1. Press I button to set measurement type to DC
measurement unit is you can use
F3 to toggle between mA and A ranges
the default is mA
2. Plug test lead connectors into input terminals
(Black to COM and Red to mA
3 Conn
ect test leads to tested points then
take DC current reading
V/Ω
μA
μA
μA
Figure 5-7 Measuring DC Current lower than 4mA