User Manual

UTD1000L
User Manual
38
Measuring Capacitance
Note:
Measuring DC Voltage
, :
.
.
.
.
.
).
＜
.
, :
.
.
).
To measure capacitance do the following
1 Press R to set the measurement type to
Resistance
2 Press F1 button to switch measurement type
to Capacitance
3 Plug test lead connectors into multimeter
input terminals (Black to COM and Red to
4. Connect test leads to the capacitor under test,
then take the reading.
To ensure the accuracy, please use the
relative mode if test capacitance is 5 nF
To measure DC voltage do the following
1 Press down V button to set measurement type
to DC Voltage.
2 Plug test lead connectors into multimeter
input terminals (Black to COM and Red to
3. Connect test leads respecti
vely to tested points,
then take DC voltage reading.
V/Ω
V/Ω
Figure 5-5 Measuring DC Voltage
Figure 5-4 Measuring Capacitance