User Manual

UTD1000L
User Manual
36
Making Multimeter Measurements
Press DSO/ DMM button to access DMM mode,
the display then enters into the multimeter
interface. Multimeter functions are ready to use at
the moment.
To measure resistance do the following:
1 Press down R button to set measurement type
to Resistance
2 Plug test lead connectors into multimeter
input terminals Black to COM and Red to
V/
3 Connect test leads respectively to the resistor
under test, then take resistance readings
Figure 5-1 Measuring Resistance
,
.
.
.
(
).
.
.
Measuring Resistance
Ω