User Manual

UTD1000L

User Manual

Observing Waveforms with use of Persistence Selecting AC Coupling

;

. ,

, :

;

)

Select the Persistence function if you want to

observe continuously the dynamic signals.

1 Press DISPLAY button to show Display Mode

2 Keep pressing F4 button to select between

1sec, 3sec, 5sec, Infinite or Auto options If

display mode is set to Infinite dynamic signals

will be kept on the screen When set to Auto

the Persistence function will turn on accordingly.

The screen displays both AC and DC voltages if the

oscilloscope is set under DC coupling. If only the

small AC signal mixed in the DC signal is expected

to display, please select AC coupling mode.

To select AC coupling do the followin

1. Press CHANNEL button to display Channel

2. Press F1 button( F2 for UTD1000DL to set

Coupling to AC

Figure 4-21 Persistent Display for Seconds

Figure 4 A UTD1000CL AC Coupling