User Manual

UTD1000L
User Manual
29
Using Using Peak Detect Mode for Pulse Peak Display
, :
. ;
. ;
.
.
(
;
AVG mode for Smoothing Waveforms
To smooth the waveforms do the following
1 Press ACQUIR button to display sample mode
2 Press F1 button to set sample mode to AVG
3 Press Left and Right arrow buttons to set AVG
number to 16 Then measurement results will
show after the Oscilloscope has averaged the data
for 16 times.
This function can be used to display waveforms at
50 ns or wider Pulse Peak or other
asynchronous waveform).
1. Press ACQUIR button to display sample mode
menu
2. Press F1 button to set sample mode to Peak
Detect.
Figure 4-19 Smoothing with 16 times AVG Mode
-
Figure 4-20 Sampling with Peak Detect Mode