User Manual

UTD1000L
User Manual
27
Measuring All Parameters
Note:
,
:
.
;
. , (
),
.
;
, ,
;
To measure automatically all parameters do the
following
1 Press MEASURE button to display
measurement menu
2 For UTD1000CL press F1 button press F2
for UTD1000DL then the screen will show
measurement results for all parameters
1) Switching between different signal sources in
UTD1000DL will change the paramteters
accordingly for channels
2) If the signal is input into only one channel of
UTD1000DL the rise delay fall delay and
phase parameters will not be measured when
this channel is choosen as the signal source
or the signal source is set to the channel without
signal input, no parameter m
easurement will be
made.
Figure 4 A UTD1000CL measures all parameters
-
17
Figure 4 UTD1000DL measures all parameters
-
B
17