User Manual

UTD1000L
User Manual
26
Checking Oscilloscope System Information
Making Auto Measurements
, :
;
;
;
:
.
To check the system configuration of the
Oscilloscope do the following
1. Press SHIFT and shift icon shows on upper
right corner of screen
2. Press CONFIGURE button to switch on display
configuration menu
3. Press F4 button, then details such as
oscilloscope model, version will show on the
screen
4. Press F1 button to switch off the displayed
window.
There are two kinds of auto measurements
available in the Oscilloscope Measure all or
customized parameters. Maximum 4 parameters
can be selected if you want to customize your
own measurements
Figure 4-16 System Information