User Manual

:
In DSO mode, press to access RECORD
(waveform record) menu or press SHIFT
first and then the button to access
STORAGE menu
Under DSO mode, press to set up
SINGLE single trigger function press
first SHIFT and then the button to access
REF waveform recall) menu.
Under DSO mode, press to automatically
set up the waveform press SHIFT first
and then the button to switch on full
autoset function The Oscilloscope can
automatically adjust the ranges to obtain
optimal waveform based on the input
signal without any manual interference
: Under DSO mode, press to start/stop data
acquisition if under DMM pr
ess the
button to lock measuring readings on
the screen
Under DSO mode, press to access
TRIGGER menu or press SHIFT first and
then the button to access UTILITY menu
Under DSO mode, press to access
HORIZONTAL menu or press SHIFT
first and then the button to open HELP
information
Combine with other buttons to select
function options
Timebase: To change scan rate, ranging
from 50s/div 10ns/div for 25MHz
bandwidth models and 50s/div 5ns/div
for 50MHz bandwidth models and
stepping in 1-2-5 Press s to access
relatively slower scan rate or ns to
speed up
Vertical Scale: To change vertical scaling,
ran
ging from 5mV/div 20V/div and
stepping in 1-2-5 Press V to zoom
in current vertical scale or mV to
zoom out
;
.
:
( ) ;
(
:
;
.
.
; ,
.
;
;
:
;
.
::
:
～
-
～
-
. “ ”
“ ”
.
～
. “ ”
“ ”
.
:
:
UTD1000L
User Manual
10
RUN/STOP
SHIFT
ns