Specifications

14
accuracy of capacitance measurement, press
button before measuring (the LCD will display 0).
3. Connect the test leads with the object being
measured.
The measured value shows on the display.
Note
The LCD displays OL indicating the capacitor is
short-circuited or the capacitor value being
tested is overload.
For testing the capacitor polarity, connect the red
test lead to anode & black test lead to cathode
instead of using test leads as mentioned above.
Readings take longer when testing a capacitor
value which is higher than 10μF range.
When capacitance measurement has been
completed, disconnect the connection between
the testing leads and the circuit under test.
C. Frequency Measurement (see figure 8)
Warning
To avoid personal injury, please do not attempt to
input frequency voltage being tested higher than
30V.
The measurement ranges are from 10Hz to 10MHz.
To measure frequency, connect the Meter as follows:
1. Insert the red test lead into the HzV
terminal and
the black test lead into the COM terminal.
2. Set the rotary switch to Hz.
3. Connect the test leads across with the object
being measured.
The measured value shows on the display.
72-9375: OPERATING MANUAL