Datasheet

15
Model UT71A/B: OPERATING MANUAL
Table 2-2. Functional Buttons
Button Description Access Method
RANGE
SETUP
SEND
Press the button once.
Press and hold the button while
turning on the Meter
Press and hold the button for more
than 1 second
Press the button once.
Range feature:
Exit AUTO and enter MANUAL ranging. In MANUAL, select
next input range. EXIT to return to AUTO. AUTO is default.
Testing resistance signal from calibrator:
When testing resistance signal from calibrator, it is necessary
to press this button to change the maximum display to 4000
counts but the accuracy remains unchanged.
Setup feature:
Access Setup selections, the display shows “SET”.
In the Setup mode, each press of SETUP button steps to
the next Selection
Press to output the data, AUTO mode switch off. The primary
display shows “SEND”.
Press EXIT to exit.
(UT71A only)