Specifications

Simulating a Transmitter
Use simulate mode when an external 24 to 30V loop power supply is available.
Insert the test leads into the mA SIMULATE – and + jacks as shown below figure 8.
OUTPUT
2.Press so that
OUTPUT is on
the display
1.Press to turn
the calibrator on
and off
Press and to
change the cursor
location.
Press and to
scroll up/down. Hold
down to scroll faster.
display “mA “
The current
cursor location
4.Insert the
test leads as
shown
Figure 8
Model UT712: OPERATING MANUAL
15