Specifications

Digital Multimeter
Page <8> 20/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Display Symbols (1) (see figure 2)
Number Symbol Meaning
1 AC
Indicator for AC voltage or current. UT60C The displayed value is the
mean value. : The displayed value is the
true rms value.
2 TRMS The : Indicator for true rms value.
3 AUTO
The Meter is in the auto range mode in which the Meter automatically
selects the range with the best resolution.
4 RS232C
Data output. It is always on the LCD, but data output is only in progress
when the Meter is connected to the computer via the included RS232C
Interface Cable.
5 % Percent: Used for duty cycle measurements.
6 H Data hold is active.
7 The REL is on to display the present value minus the stored value.
8
The battery is low.
Warning To avoid false readings, which could lead to possible electric
shock or personal injury, replace the battery as
soon as the battery indicator appears.
9 Centigrade. The unit of temperature.
10 Test of diode
11 The continuity buzzer is on.