Specifications

[e-mail]
4
- Disconnect circuit power and discharge all high-voltage capacitors before testing resistance,
continuity, capacitance or diodes.
- Replace the battery as soon as the battery indicator
appears. With a low battery, the Meter might
produce false readings that can lead to electric shock and personal injury.
- Remove test clips from the Meter and turn the Meter power off before opening the Meter case. When
servicing the Meter, use only the same model number or identical electrical specifications replacement
parts.
- The internal circuit of the Meter shall not be altered at will to avoid damage of the Meter and any
accident.
- Soft cloth and mild detergent should be used to clean the surface of the Meter when servicing. No
abrasive and solvent should be used to prevent the surface of the Meter from corrosion, damage and
accident.
- Turn the Meter power off when it is not in use and take out the battery when not using for a long time.
- Please constantly check the battery as it may leak when it has been using for some time, replace the
battery as soon as leaking appears. A leaking battery will damage the Meter.
International Electrical Symbols
The Meter Structure