Specifications

[e-mail]
12
D. Inductance Test
Remarks:
- Measure of Inductance: 1H=10^3 mH = 10^8µ.
- Overload Protection:
0.315A, 250V, fast type fuse, Ф5x20 mm
E. Transistor
Maintenance
This section provides basic maintenance information including battery and fuse replacement
instruction.
Warning
Do not attempt to repair or service your Meter unless you are qualified to do so and have the relevant
calibration, performance test, and service information. To avoid electrical shock or damage to the
Meter, do not get water inside the case.
A. General Service
- Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or solvents.
- To clean the terminals with cotton bar with detergent, as dirt or moisture in the terminals can affect
readings.
- Turn the Meter power off when it is not in use and take out the battery when not using for a long time.
- Do not store the Meter in a place of humidity, high temperature and strong magnetic field.