User Manual

25
To measure capacitance, connect the Meter as follows:
1. Insert the red test clip or red test lead into the VΩ
o
C
terminal and the black test clip or black test lead
into the mA terminal.
2. Set the rotary switch to an appropriate measurement
position in Fcx range.
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
Measurement Operation(13)
Note
l For testing the capacitor with polarity, connect the
red test lead to anode & black test lead to cathode
l When the tested capacitor is shorted or the capacitor
value is overloaded, the LCD display “1”.
l To minimize the measurement error caused by the
distributed capacitor, the testing lead or testing clip
should be as short as possible.
l It is normal to take a while for zeroing when changing
over the measurement range. This process will not
affect the accuracy of the final readings obtained.
Model UT50E: OPERATING MANUAL