Operating instructions

7. Technical Information page 79
Mercury Instruments UT-3000-E_V2.11.docx 31.07.12
Analytical Technologies
7.3 Storage and transport
The interior of the UT-3000 and the calibration device should be kept save from moisture
and hard shocks. Vibrations caused by transport in a car do not harm the UT-3000.


 The Automatic Calibration Unit and the Manual Calibration Unit must
always be carried or transported horizontal, it must never be tilt or turned over. Hard
shocks must be avoided.


 In case of damage that leads to a mercury spillage observe the material safety data sheet in
the appendix. Consult an expert!