Operating instructions

6. Maintenance page 76
Mercury Instruments UT-3000-E_V2.11.docx 31.07.12
Analytical Technologies
F IGURE : NEEDLE VALVES FOR HEATING FLOW ADJUSTMENT AND
SAMPLING FLOW ADJUSTMENT
6.10 Gold Trap Assembly
The GoldTrap is snapped into holding clamps which are mounted on an angled metal plate. This
plate holds following electronic parts on its down side:
(a) A driver transistor that switches the power for the heating coil of the GoldTrap,
(b) An optical coupler,
(c) Two resistors.