Operating instructions

3. Operating instructions page 26
Mercury Instruments UT-3000-E_V2.11.docx 31.07.12
Analytical Technologies
3.6.5. Using the HG-Transfer Software for Data Transfer to a PC
Calibration and analysis data are sent via serial output of the UT-3000 to a connected computer
using the Hg-Transfer software (comes with the instrument). The Hg-Transfer software has to
be installed on the connected computer before data are transferred. Data can be displayed, stored
(as .txt file or EXCEL® file) and printed.
Figure: Hg-Transfer software main screen.
With choosing „Port Settings“
you can select the port of your computer
used for connection with the VM-3000
and the communication parameters.
By choosing „Configuration“ you can
choose the type of analyzer:
UT = UT-3000.