Operating instructions

3. Operating instructions page 24
Mercury Instruments UT-3000-E_V2.11.docx 31.07.12
Analytical Technologies
Select the Transfer pull down menu. Select Capture Text. Enter file name and press Start.
 Press F3-Send logdata to PC on the UT-3000.
 The logged data are now transferred from the UT-3000 to the PC. Starting date, starting time,
sample volume and measurement data are transferred in this order. Data sets are separated by
a carriage return.
3.6.3 Delete logged data
Select the Logger Mode as described above under 3.5.
 Press F4- clear Logdata.
 The Clear Logdata command will delete all measurement data stored in the RAM.
3.6.4 Import of data into EXCEL
The data once stored as text file with Hyper Terminal can easily be imported into an EXCEL
data sheet by selecting the data import function in EXCEL.
 Measurement data are sent using a point (“.”) for decimals. Depending on the setting of
your EXCEL it may be necessary to convert the point into a comma (“,”). Use the search
and replace function of EXCEL to do this quickly.