Operating instructions

3. Operating instructions page 18
Mercury Instruments UT-3000-E_V2.11.docx 31.07.12
Analytical Technologies
3.4.2 Set Cycle Duration
Press F2-Set Sample Parameters in the main menu and activate “Set Cycle Duration” by
moving the arrow to the corresponding line. Then press F2 and enter the desired cycle duration.
Characters can be deleted with the 

 - key. The according sample volume is automatically
calculated and displayed.


 The Cycle Duration is the total time needed for a complete measuring cycle, that means:
Sampling Duration, Zeroing, Heating, Trap Cooling, Trap Cleaning, …