Operating instructions

2. Installation page 12
Mercury Instruments UT-3000-E_V2.11.docx 31.07.12
Analytical Technologies
internal dipswitch on the backplane (see picture below) you can use this RS232-socket instead of
the USB with an appropriate 1:1 cable (part-no. 202-07) for the output of measuring values.
FIGURE: BACKPLANE WITH DIPSWITCH BETWEEN USB (FACTORY SETTING) AND RS232
F IGURE : SERIAL RS232 OUTPUT SOCKET ON INSTRUMENTS REAR SIDE
1
5
6
9
RS 232
Pin Nr. 5 3 2
GND RxD TxD