UT2568 OPERATING MANUAL Contents 1. Overvaluation— 1 Il. COBS (Out Of box 1 ll. Safety Operation 2 IV. Electrical 4 V. Appearance 5 V. Functions of 7 VII. Technical Indexes——M General 11 2. Environmental 3. Electric specification——— 12 Viol. Measurement Operation 1. Measuring of AC Current (AC———15 2. Measuring of DC Cement 3. Measuring of AC Voltage 18 4. Measuring of DC Voltage 5.Measurement of Resistance 23 6. Conductivity Testing (CONT— 25 7. Dined Measurement 27 8. Measuring of Capacitance 29 9.
UT2588 OPERATING MANUAL I. Overview UT2586B is a safe and reliable AC/DC digital clamp mater in 3 5% digit with stable performance (hereinafter referred to as the clamp meter). Tha circuit design of the complete machine adopts the large scale integrated circuit Z/A analog-digital converter as core, and the overload protraction circulate In the whole range and unique appearance design make it a dedicated electrode-tachnical instrument.
UT2588 OPERATING MANUAL are damaged obviously, the display screen cannot work, etc., or you consider that the clamp meter cannot work well, please don't use the clamp meter any mots. It is strictly prohibited to use the clamp meter without the rear cover or battery cover, otherwise, shock hazard may occur.
UT2588 OPERATING MANUAL V. Appearance Structure w . Clamp head It is the sensing device for AC/DC measurement. Fix the wire into the designated position to measure the cement through the wire. As the head may touch the live wire at the time of the measurement, the user's hand shall be kept below tha clamp head. Clamp body It is the part held by the user's hand.
UT2588 OPERATING MANUAL VL. Functions of Keys SELECT: function selection button, which works at ACIDS, ACEVEDO, and RES/CNT/DIO/CAP gears. 1. Short press SELECT button at ACIDIC gear to switch over ACI and DCI function. ‘When the rotary knob switches to ACIDIC gear, It defaults to AC| function. Short pass the SELECT button to switch to DCI function from ACI function; and short press the SELECT button again to switch to ACI function. The above forms a cycle. .
UT2588 OPERATING MANUAL Short press ZERO button under DC gear to enter the restating mode and deduct the base number during DC measurement. Under the resetting mode, it will display D-Df on main display screen, of which Df is the DCI base number before pressing ZERO button, and Dn is current measured value. Meanwhile, it will display "ZERO" symbol at the top left of the display screen, to Indicate the er taring of the resetting mode at present.
UT2588 OPERATING MANUAL VII. Technical Indexes 1. General specifications Liquid crystal display:Maximum display up to 5998; Polarity display:Automatic positive and negative polarity display; Over-load display:Display in “OL” or Battery voltage display:When the battery voltage Is low than 2.4V, it will display the low-voltage symbol; Sampling rate:Approximately 3 times/second; Sensor archetypal affect sensor for DC/AC measurement; Measured position whensoever measuring the current, 1.
UT2588 OPERATING MANUAL Viol. Measurement Operation Instructions A Before measuring, It Is necessary to ensure that the clamp meter has been switched to correct tap position. Measurement shall be in strict accordance with the guidance herein, and it Is prohibited to switch the tap position during measurement, In order to avoid injury of users or damage of clamp meter. 1.
UT2588 OPERATING MANUAL 2. Measuring of DC Current (DCI) (1) Set measuring function range of DC current Rotate the knob to start up and keep the pointer directing to “As"; the clamp meter will ba within the measuring function range of DC current as default.
UT2588 OPERATING MANUAL 3.
UT2588 OPERATING MANUAL 4, Measuring of DC Voltage (DCV) (1) Insert meter probes Insert the black probe into “COM” input end and insert the red probe into “VQ" input end to prepare for the measurement; (2) Set measuring function range of DC voltage Rotate the knob to start up and keep the pointer directing to “V== ", well be within the measuring function range of DC voltage as default.
UT2588 OPERATING MANUAL 5.
UT2588 OPERATING MANUAL 8. Conductivity Testing (CNT) {1} Insert meter probes Insert the black probe Into “COM " Input and and insert the red probe into “VAQ" input end to prepare for the measurement; (2) Set function range of conductivity testing Rotate the knob to start up and aim the pointer the clamp meter well be within the measuring function range of conduction testing as default.
UT2588 OPERATING MANUAL 7. Diode Measurement (DIO) (1) Insert meter probes Insert the black probe into “COM ® input end and insert the red probe into “VQ” input end to prepare for the measurement; (2) Set function range of diode measurement Revolve the rotary knob to start up and aim the politer at and the clamp meter will be within the measuring function range of diode measurement a8 default.
UT2588 OPERATING MANUAL UT2568 OPERATING MANUAL 8. Measuring of Capacitance (CAP) {1) Insert meter probes Insert the black probe into “COM" input end and Insert the red prob Info V" Input end to prepare for the measurement; {2) Set function range of capacitance measurement Rotate the knob to start up and keep the pointer directing to the clamp meter will be within the measuring function range of capacitance measurement as default.
UT2588 OPERATING MANUAL UT2568 OPERATING MANUAL 8. Measuring of Induced Voltage (NCV) (1) Set the measuring range of induced voltage Rotate the knob to start up and keep the pointer directing to “NC, and the clamp mater will be within the measuring function range of induced voltage as default; {2) Measuring of Induced voltage The top of right end of clamp head is equipped with electromagnetic induction sensor, which is able to detect whether the alternating current magnetic fief exists or not.
UT2588 OPERATING MANUAL IX. Maintenance and Repair A\ Naming: please pull out the test probe before uncapping the avoid electric shock. 1. General Maintenance a.The maintenance and other services of this damp meter shall be accomplished by qualified professional maintenance staff or designated maintenance department. b. The shell shall be regularly cleaned by dry cloth. Detergent which contains abracadabra or solvent shall not ba applied. 2.
