User Guide

Model UT232: OPERATING MANUAL
23
Figure 14
Figure 15
Figure 13
After sum up the current power meaursuremnt value
of the second phase, then press SELECT again to
choose the third phase 3, as figure 13.
The double display shows the value of acitve power
KW and PG of 3.
If ncessary, press to get the sum of watts as figure
14.
After sum up the current power measurement value
of the third phase, finally press SELECT again to
display the 3 phase sum of acitve power value and
reactive power value.
Press MAX/ or MIN/ as figure 15 to step through
in sequence three phase sum of active power+three
phase sum of reacitve power, and three phase sum
of power factor + 3 phase sum of apparent power.