User Guide

10
UT207A/208A/209A Operating Manual
The Meter Structure (see gure 1)
① Hand Guards: to protect user’s hand from
touching the dangerous area.
② Trigger: press the lever to open the
transformer jaws. When the pressure on
the lever is released, the jaws will close.
③ Functional Buttons
④ Input Terminals
⑤ LCD Display
⑥ Rotary Switch
⑦ Transformer Jaw: designed to pick up
the AC and DC current owing through
the conductor. It could transfer current
to voltage. The tested conductor must
vertically go through the Jaw center.
Figure 1