Specifications

21
I. Model UT206: Temperature Measurement
(See figure 11)
The temperature measurement range is -40˚C~1000˚C. To measure
temperature, connect the Meter as follows:
1. Insert the red temperature probe into the
HzΩ terminal 
and the black temperature probe into the COM terminal.
2. Set the rotary switch to ˚C.
3. Place the temperature probe to the object being measured.
The measured value shows on the display.
Note
• The Meter automatically displays the temperature value inside the 
Meter when there is no temperature probe connection.
• The included point contact temperature probe can only be used up 
to 250˚C. For any measurement higher than that, the rod type 
temperature probe must be used instead.
• When temperature measurement has been completed, disconnect the 
connection between the testing leads and the circuit under test, and 
remove the testing leads away from the input terminals of the Meter.
Measurement Operation (9)
Model UT205/UT206: OPERATING MANUAL