Instructions for Use

9 10
7. Point Temperature
1) Press the SET button to open the main menu.
2) Press the left/right button to select the option.
3) Press the SET button to enter the Point Temperature menu.
4) Press the up/down button to select the desired point.
A. Press the SET button to turn on the point and enter the thermal imaging page
Press the left/right/up/down button to move the point.
Press the SET button to confirm and read the temperature of the current point.
B. Press the SET button to turn off the current selecting point.
Press the back button to exit.
8. Image Mode
1) Press the SET button to open the main menu.
2) Press the left/right button to select the option.
3) Press the SET button to enter the Image Mode menu.
4) Press the up/down button to select the desired mode from Thermal (infrared image),
Digital (visual light image), Fusion (image blending), and PIP (picture in picture).
5) Press the SET button to apply the current mode.
6) Press the back button to exit.
7) In Fusion mode, press the left/right button to select the desired blending ratio from 0%
(pure visual light image), 25%, 50%, 75%, and 100% (pure infrared image) under the
thermal imaging page.
8) If Alignment Distance is selected, users can set the alignment distance (meter) of the
fusion target to 0.5, 1.0 (default), 1.5, 2.0, 2.5 or >3.0.
UTi260B User ManualUTi260B User Manual