Datasheet
3. Resistance measurement (Ω) (shown in Figure 5)
Warning: Be sure to cut off circuit power and
discharge residual charge of all capacitors before load
connection.
●To set knob.
Please place function knob to “Ω, , ,
“ measurement gear.
●To select key functions.
To set measured DC voltage to initially set value.
Initially set automatic range can be set to relative
range by pressing REL△ key.
●To connect load.
To gain excellent measured result by separating element
from circuit.
To disconnect probe and measured circuit then remove
probe from input end after all measurement operations.
4. Diode measurement ( ) (shown in Figure 6)
Warning: Be sure to cut off circuit power and
discharge residual charge of all capacitors before load
connection.
●To set knob.
Please place function knob to” Ω, , ,
“measurement gear.
●To select functions.
To select diode detection by pressing SELECT key;
●To connect load.