Datasheet

1. AC signal measurement instructions;

2. Negative polarity instructions;

3. DC signal measurement instructions;

4. Instructions of deficient battery charge;

5. Automatic range instructions;

6. Diode testing instructions;

7. ON/OFF detection instructions;

8. Measurement instructions of duty cycle;

9. Data maintenance instructions;

10. Measurement instructions of relative value;

11. Temperature measurement unit (℃);

12. Resistance measurement unit (ohm, kilo-ohm

and mega-ohm);

13. Frequency measurement unit (Hz);

14. Capacitance measurement unit (nF and µF);

15. Current measurement unit (A);

16. Voltage measurement unit (mV and V);

VII. KEY FUNCTIONS AND AUTOMATIC SHUTDOWN

1.HOLD

As reading maintenance key, it is to maintain displayed

reading by triggering. Displayed value will be locked for

constant display by pressing the key once. It can be

pressed again to release locking status and return to

common measurement status.

2.REL△

Current display value of clamp meter will be used as

reference value after pressing the key. Display will be

reset to “0” to minus reference value from measurement

result automatically until exiting measurement function of

relative value by pressing the key again. relative range

can be switched over by pressing the key in

and Ω

measurement gears.

3. SELECT