Datasheet

To disconnect probe and measured circuit then remove
probe from input end after all measurement operations.
8.Temperature measurement (℃) (shown in Figure
10)
●To set knob.
To place function knob to “℃”measurement gear.
●To select functions.
●To connect load.
1) LCD will display “OL” if failing to insert
temperature sensor into temperature gear. Clamp meter
will display current indoor temperature after user
inserting temperature sensor.
2) Temperature protection gear of the machine is plug-in
resistance (R59) of 1KΩ. Electrified conductor cannot be
inserted into input jack during temperature measurement
to avoid resistance burnout.
9. DC current measurement ( ) (shown in Figure
11)
●To set knob.
To place function knob to “40A” or “600A” measurement
gear.