Installation guide

[e-mail]
7
4. Help: Content; About
Notes on front panel
Channel status: Current status of the oscilloscope is displayed. When transmitting data,
this status bar displays the current status. When the oscilloscope’s status changes,
so will this status bar, but you cannot use this bar to control the current status of the
oscilloscope.
1. CH1: Coupling method (DC, AC, GND); Bandwidth suppression (On Off); Filter type
(low-pass, high-pass, band-pass, band-stop); Digital filter (when the indicator
lights up the function is ON, when the indicator lights off the function
is OFF); Reverse (when the indicator lights up the function is ON, when the
indicator lights off the function is OFF); Probe (1X, 10X, 100X, 1000X).
2. CH2: Coupling method (DC, AC, GND); Bandwidth suppression (On Off); Filter type
(low-pass, high-pass, band-pass, band-stop); Digital filter (when the indicator
lights up the function is ON, when the indicator lights off the function
is OFF); Reverse (when the indicator lights up the function is ON, when the
indicator lights off the function is OFF); Probe (1X, 10X, 100X, 1000X).
3. Sampling method; Random; Real-time; SCAN
4. Interpolation (Yes, NO)
5. Current activated channel (MATH; CH1; CH2)
Channel selection: CH1; CH2; MATH
Deviation factor adjustment: Vertical; Horizontal
Range adjustment: Voltage range; Time base range
Real-time Control: Equipment selection (Serial, USB); ON/OFF (when the indicator lights
up the function is ON, when the indicator lights off the function is OFF); Data transmission
(when the indicator lights up the function is ON, when the indicator lights off the
function is OFF); Transmission screen (when the indicator lights up the function is ON,
when the indicator lights off the function is OFF).
Reverse Mathematic function: Indicator on means reverse mathematic function is in process.
Indicator off means reverse mathematic function is not in process.
Mathematic function: Select with the MATH option in the function menu in the menu bar.
Auto Refresh: Set up the refresh time interval with the waveform refresh menu in the menu
bar.
Refresh time: Set up refresh time while performing auto refresh.
3. Chapter Two: Operation Guide
After reading Chapter One you may now have a basic understanding of how this
system works. The following are more specific instructions for using the software.