User Manual

26
25
600.0μA
6000μA
60.00mA
600.0mA
6.000A
10.00A
µA
mA
A
0.1μA
1μA
0.01mA
0.1mA
0.001A
0.01A
±( )0. 8% +3
±( )1. 2% +5
µA
mA
A
600.0μA
6000μA
60.00mA
600.0mA
6.000A
10.00A
0.1μA
1μA
0.01mA
0.1mA
0.001A
0.01A
±(1.0+3）
±( ）1.5%+3
Overload protection: 1000V-PTC
Remark: configured point K-type (Ni-Cr ~ Ni-Si) thermocouple, which is only applicable for temperature
below 230°C/446°F
10.8 DC Current Measurement
Range
Resolution
Accuracy
Overload protection: 1000Vrms
The meter will alarm when over 10A current is input, OL symbol will be displayed on LCD when input over
11.00A current.
Range
Resolution
Accuracy
10.9 AC Current Measurement
Frequency response: 40~500Hz
Display: true RMS value
Accuracy guaranteed range: 1~100%, less than 2 digits residual reading is allowed for short-circuit.
AC peak factor can reach 3.0 at full value
Non-sine waveform: Peak factor is 1.0~2.0, accuracy should be added 3.0%
Peak factor is 2.0~2.5, accuracy should be added 5.0%
Peak factor is 2.5~3.0, accuracy should be added 7.0%*
Overload protection: as same as in DC current measurement
UT15B PRO/UT17B PRO User Manual UT15B PRO/UT17B PRO User Manual