User Manual

89
UT108/109 OPERATING MANUAL
UT108/109 OPERATING MANUAL
90
B. Replacing the Fuses (see gure 27)
Warning
To avoid electrical shock or arc blast, or personal injury or damage to the Meter, use
specied fuses ONLY in accordance with the following procedure.
To replace the Meter’s fused:
1. Turn the Meter off and remove all connections from the terminals.
2. Remove the holster from the Meter.
3. Remove the 3 screws from the case bottom, and separate the case top from the case
bottom.
4. Remove the fuse by gently prying one end loose, then take out the fuse from its bracket.
5. Install ONLY replacement fuses with the identical type and specication as follows and
make sure the fuse is xed rmly in the bracket.
Fuse 1: 1A, H 240V, fast type, φ6x25 mm.
Fuse 2: 10A, H 240V, fast type, φ6x25 mm.
6. Rejoin the case bottom and case top, and reinstall the 3 screws and holster.
Replacement of the fuses is seldom required. Burning of a fuse always results from
improper operation.