User Manual

UT108/109 OPERATING MANUAL
46
L. Operation of Hold Mode
The Hold mode is applicable to all measurement functions:
● Press HOLD to enter Hold mode
● Press HOLD again to exit Hold mode
● In Hold mode, is displayed
M. RANGE button
● Press RANGE to enter the manual ranging mode; the Meter beeps.
● Press RANGE to step through the ranges available for the selected function; the
Meter beeps.
● Press and hold RANGE for over 2 seconds to return to auto ranging.
N. MAX MIN button
● Press MAX/ MIN to start recording of maximum and minimum values. Steps the
display through high (MAX) and low (MIN) readings. The Meter enters manual
ranging mode after pressing MAX / MIN button.
● Press and hold MAX MIN for over 2 seconds to exit MAX MIN mode and return to the