User Manual

Table Of Contents

UT108/109 OPERATING MANUAL

G. Capacitance Testing (see gure 10)

Warning

To avoid damage to the Meter or to the equipment under test, disconnect circuit

power and discharge all high-voltage capacitors before measuring capacitance.

To measure capacitance, connect the Meter as follows:

1. Insert the red test lead into the terminal and the black test lead into the COM

terminal.

2. Set the rotary switch to and press BLUE button to select capacitance measurement

mode.

3. The measured value shows on the display.

Note

● The LCD displays OL indicating the tested capacitor is shorted or it exceeds the

maximum range.

● When capacitance measurement has been completed, disconnect all the connection

between multi-purpose socket, capacitor and the Meter.