User Manual

ManualsBrandsUNI-T ManualsMultimetersDigital Automotive Multimeter

Table Of Contents

UT108/UT109 Interface Software Manual

System Requirements(UT108/UT109)

To use UT108/UT109 Interface Program, you need the following hardware and software:

An IBM PC or equivalent computer with 80586 or higher processor and 600 x 800 pixel or better monitor.

Microsoft Windows 98,Window2000.window NT,Windows ME. Windows XP, Windows VISTA,Windows 7.

At least 128MB of RAM.

Can access to a local or a network CD-ROM.

A usb port.

A mouse or other pointing device supported by Windows.

Hardware install:

If what to use is multimeter the USB provide with the form connect a people's line, the USB pick up a people line of

red unauthorized biography lose the line to receive to carry to insert multimeter fix in the slot with a back of the form

protection, then go on-line of another on carry with computer of string a right conjunction is then.

Installing UT108/UT109 Interface Program

To install UT108/UT109 Interface Program, please follow below procedure:

Before install the interface program, make sure that the computer is running the Window 98 or above operating system.

1.Insert the provided CD-ROM into CD-ROM drive.

2.Double-click the My Computer icon from the Windows desktop.

Double click to install

(figure 1)

3.click UT108/UT109 Setup to display the contents of the folder.Double-click the file Setup.Exe.

Summary of content (9 pages)

PAGE 1
UT108/UT109 Interface Software Manual System Requirements(UT108/UT109) To use UT108/UT109 Interface Program, you need the following hardware and software: An IBM PC or equivalent computer with 80586 or higher processor and 600 x 800 pixel or better monitor. Microsoft Windows 98,Window2000.window NT,Windows ME. Windows XP, Windows VISTA,Windows 7. At least 128MB of RAM. Can access to a local or a network CD-ROM. A usb port. A mouse or other pointing device supported by Windows.
PAGE 2
UT108/UT109 Interface Software Manual (figure 2) 4.Follow the on-screen installation instructions.
PAGE 3
UT108/UT109 Interface Software Manual 5. Until the software installs to complete. (figure 4) 6. The software installs to complete, the customer can find out" the DMM Interface Program- UT108/UT109" in program folder. click to Test (figure 5) Getting Started with UT108/UT109 Interface Program .From the Windows Start menu, choose Programs > DMM > UT108/UT109 Press USB connect Press Connect from menu bar to start the connection, the icon will be displayed.
PAGE 4
UT108/UT109 Interface Software Manual Connect states LCD Display Graphic area Sampling Control Area Records Area (figure 6) Data record Repeat Sampling interval Clear Open Save Print (figure 7) During the connection, you can select the following functions by clicking the corresponding icon or the menu bar: Repeat: Click the box to keep the repeated record, or unclick the box to ignore the repeated record. The repeated records will be shown in graphic no matter what the selection is.
PAGE 5
UT108/UT109 Interface Software Manual Graphic operation Fill Record Save First Previous Next Last Zoom (figure 7) During the connection, you can select the following functions by clicking the corresponding icon or the menu bar: Fill: Click the box to select “fill-up graph” or unclick to select “line graph”. Record: Setting the number of record to be shown on graphic. Clear: To clear all the current records’ graphics permanently. Save: To save current graphic into BMP format.
PAGE 6
UT108/UT109 Interface Software Manual whether equipments of USB installs the successful method or not.While inserting the computer for the first time the appropriation USB line that the UT108/UT109 install, the computer will hint an information,such as figure, automatically eight.
PAGE 7
UT108/UT109 Interface Software Manual Figure 10 Next move, the choice" install from the disk" figure 11 Figure 11 Next move, specify to install the path very important, in UT108/UT109 factory go together with of connect a people's CD, have the the USB Drive this document to clip, pick out other gearings document" SiUSBXp.inf" to carry on the gearing.Such as the figure 12.
PAGE 8
UT108/UT109 Interface Software Manual Figure 12 Next move, choose to still continue.Figure 13 Figure 13 Next move, if the diagram shows the gearing progress.
PAGE 9
UT108/UT109 Interface Software Manual Figure 14 Next move, install to complete. In " the equipments management machine"-- " The in general use string go to correspond by letter the controller"-- The USBXPress device" such as figure 16.Mean the USB drives to install the success.