User manual

46
UNI-T
®
UT4000 User Manual
Measurement menu
Operation : Press [MEASURE] to display 4 function options, as shown in the table below.
Table 2-22
Function Menu Setup Explanatory Note
All parameters Display all parameters. To close press
[CLOSE].
Customized
parameters
Up to 4 parameters can be displayed on
screen.
Indicator Visual indication of the measurement value’s
physical properties by lines.
Clear measurement Clear the finished parameters.
Note : Customized parameters are for quick parameter measurement. This device has 27
measurement parameters. In general use, the user is not required to measure all
parameters. Only a few have to be tested. In this case, set the parameters you require as
customized parameters. All such parameters will be displayed on the screen.
Figure 2-26 Measurement parameters