User manual

41
UNI-T
®
UT4000 User Manual
3. Select bitmap to enter the bitmap storage menu. See Table 2-18.
Note : This function can be recalled and used only when the USB device is inserted.
Table 2-18 Bitmap storage menu
Function Menu Setup Explanatory Note
Bitmap Export the display data to the USB device in
bmp format.
⎯
Export Document name
OK
Default name of the file being exported to the
USB device is “UNI T0000.BMP”.
Press this key to export to the USB device.
⎯
⎯
About INTERNAL and CSV formats : You can select Internal or CSV format when you
export the reference waveform to the USB device. In Internal format, it can only be
imported to the oscilloscope in REF and not any other interface. In CSV format, it can be
opened in EXCEL as it is a set of 2-dimensional data of voltage and time correlation.
Setting up Utility Functions
As shown below, the [UTILITY] button in the control zone is the function key for
alternative functions.
Figure 2-24 Function key for the sampling system (function)
Press the [UTILITY] button to pop up the setup menu for utility functions. See Table
2-19.