User manual

40
UNI-T
®
UT4000 User Manual
Table 2-16 Reference waveform storage menu
Function Menu Setup Explanatory Note
Type Reference waveform Select the waveform storage and recall menu.
Signal source CH1
CH2
Select the waveform from CH1.
Select the waveform from CH2.
Storage position 1~10 With the multifunction control knob, set and
select the position in which the reference
waveform is to be stored in the built-in
memory.
⎯
Export Document name
Document format
OK
Select the default name “UNI T0000” for the
reference waveform file being exported to the
USB device with the multifunction control
knob.
Set the format as : internal or CSV.
Export the reference waveform to the USB
device.
2. Select setup to enter the setup storage menu. See Table 2-17.
Table 2-17 Storage menu setup
Function Menu Setup Explanatory Note
Setup Save the current front panel setup status.
Save
⎯
Select a save position with the multifunction
control knob on the front panel (total 10 sets)
and save the setup.
Call back
⎯
Recall the saved setup status.
Import Document name
OK
N
ame the reference waveform file being
imported from the USB device with the
multifunction control knob.
If the document exists on the USB device, it
will be imported. Otherwise the system will
indicate “I/O operation failure”.
Export Document name
OK
N
ame the reference waveform file being
exported to the USB device with the
multifunction control knob.
The current front panel setup status is
exported.