Manualshelf

User's Manual

ManualsBrandsUni-Art Precise Products ManualsAudio EquipmentWireless Speaker Receiver
123456789
3
5. Plug the adaptor in the AC source and the green POWER LED will illuminate. If the green POWER
LED does not illuminate, make sure the adaptor is plugged in properly.
SPEAKER RECEIVER
1. Insert 6 pieces ‘AA’ size ALKALINE battery into the battery compartment with correct polarity at the
rear of the speaker or connect the 12V power adaptor to the DC input jack on the rear of each
speaker, then plug it to the wall AC outlet.
2. Switch on the speaker by pressing the POWER switch and the POWER/STEREO LED will light up
in blue. Switch off the speaker by pressing the POWER switch again.