User's Manual

TROUBLE SHOOTING
NO SOUND
z Ensure the AC adaptor is fully inserted into the AC outlet and the power
connection input on the transmitter.
z Ensure the speaker is switch ON.
z Speaker’s battery capacity is too low, replace with new batteries or connect
the AC adaptors to the speakers.
z Ensure the TV or audio component is ON.
z The connected audio / video equipment is not playing. Start playing the
equipment.
z The volume of speaker is too low, adjust the volume to an appropriate level.
DISTORTED
z Press the “AUTO SCAN” button under the speakers until the frequency
between the transmitter and speakers are matched.
z Change the position of the channel selector on the transmitter. You must
then press the “AUTO SCAN” button on the speakers.
z Battery capacity is too low. Replace with the new battery.
z Ensure the volume level of speakers is adjusted properly.
z The speaker is too far away from transmitter, move them closer.
z The input level of the audio signal is too low. Turn up the volume of the
audio source equipment.