User's Manual

TROUBLE SHOOTING
NO SOUND
- Too much water retention inside the speaker grill. Turn over the speaker
and let the water drain out from the speaker grill.
- Battery capacity of Speaker and/or Transmitter is too low, replace with
new batteries.
- If AC power source were used, ensure the AC adaptor is fully inserted
into the AC outlet, and the power connection input on the transmitter is
properly connected.
- Ensure the speaker is switch ON.
- Ensure the audio source is ON and working well, and its volume level is
set to at least 50%.
- The volume of speaker is too low, adjust the volume to an appropriate
level.
DISTORTED
- Press the “SCAN” button on the speaker until it matches the frequency
with the transmitter.
- Switch to a different channel on the transmitter. Then press the SCAN
button on the speakers again.
- Battery capacity is too low. Replace with new batteries.
- Ensure the volume level of speakers is adjusted properly.
- The speaker is too far away from transmitter, move them closer.
- The input level of the audio signal is too low. Turn up the volume of the
audio source equipment.