User's Manual

NOTE :
If disruption should occur (signal breaks up), press the “SCAN” auto-tuning button
on the speaker to maximize best reception.
If you hear interference from other components, change the channel of transmitter,
and then pressing the “SCAN” auto-tuning button on speaker for best reception.
When transmitting / receiving over long distances, the signal from the system will
become weaker.
SWITCHNG OFF
1. Press the POWER button to turn off the speaker and the POWER LED goes
off.
2. For protection of the transmitter and power saving, the transmitter will cut off
automatically if there is no/weak operation input signal from audio source for
4 minutes. In other words, if the signal comes back, the transmitter will
resume working automatically.