User's Manual

5. Press the “SCAN” auto-tuning button to get the best tuning reception in the
speakers. When the button is pressed, frequency tuning starts automatically
and it stops when a signal is detected. The POWER LED will illuminate
steadily.
A). Keep a distance of the speaker up to 7 meters apart from transmitter, and
then press “SCAN” auto-tuning button for best tuning reception.
B) Whenever you find frequency jam, move your channel switch from one
channel to the other channel on the transmitter, and then press the “SCAN”
auto-tuning button on the speaker again.
Caution: Tighten the battery door clockwise and ensure the battery door is closed
firmly without any gap before placing the speaker into the water.
6. You can now place the floating speaker in the pool, bathtub, hot tub etc.
CAUTION: Speaker will performance best without water resting on top of the
speaker. Periodically draining water from the speaker by inverting it
helps to achieve better performance. Clean the speaker and housing
thoroughly, and keep it dry between uses.