User's Manual

INSTALLATION
TRANSMITTER
1. Connect the supplied AC power adaptor to an electrical wall outlet.
2. Plug the AC power adaptor (12V/200mA) in the DC jack located on the rear of
the transmitter, or you can insert 4 X “AA” size ALKALINE batteries into the
battery compartment of the transmitter with correct polarity.
3. Turn on the transmitter by set the POWER switch to ON position, and the
POWER LED (blue) on transmitter will start flashing.
4. The retractable audio cord that located at the front of transmitter can be
connected to audio output jack of any audio source such as i-Pod, i-Phone,
MP3 handphone, Hi-Fi, MP3/CD/VCD/DVD players and etc.
5. As soon as the transmitter is receiving the audio signal, the POWER LED
(blue) will illuminate steadily.